    /**
  @page FSMC_SRAM_DataMemory FSMC SRAM data memory example

  @verbatim
  ******************* (C) COPYRIGHT 2016 STMicroelectronics ********************
  * @file    FSMC/FSMC_SRAM_DataMemory/readme.txt 
  * @author  MCD Application Team
  * @version V1.5.0
  * @date    14-April-2017
  * @brief   Description of the FSMC SRAM_DataMemory example.
  ******************************************************************************
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  @endverbatim

@par Example Description 

How to configure the FSMC controller to access the SRAM memory including the
heap and stack.

The SRAM is IS61WV51216BLL.

The example scenario does not reflect a real application case, its purpose is to
provide only the procedure to follow to use the external SRAM as data memory.

This example does not use the default library startup file. It uses a modified 
startup file provided with the example. The user has to add the new startup 
file in the project source list. While startup, the SRAM is configured 
and initialized to be ready to contain data.

The user has to configure his preferred toolchain using the provided linker file.
The RAM zone is modified in order to use the external SRAM as a RAM.
 
At this stage, all the used data can be located in the external SRAM.

Then the SystemClock_Config() function is used to configure the system clock (SYSCLK) 
to run at 72 MHz. 

The user can use the debugger's watch to evaluate "uwTabAddr" and "MSPValue" variables
values which should be equal to "0x680xxxxx". 
 
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
      based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
      a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
      than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
      To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
      
@note The application need to ensure that the SysTick time base is always set to 1 millisecond
      to have correct HAL operation.

@par Directory contents 

 - FSMC/FSMC_SRAM_DataMemory/Inc/stm32f1xx_hal_conf.h        HAL Configuration file
 - FSMC/FSMC_SRAM_DataMemory/Inc/main.h                      Header for main.c module 
 - FSMC/FSMC_SRAM_DataMemory/Inc/stm32f1xx_it.h              Header for stm32f1xx_it.c
 - FSMC/FSMC_SRAM_DataMemory/Src/main.c                      Main program
 - FSMC/FSMC_SRAM_DataMemory/Src/stm32f1xx_it.c              Interrupt handlers
 - FSMC/FSMC_SRAM_DataMemory/Src/system_stm32f1xx.c          STM32F1xx system clock configuration file 
    

@par Hardware and Software environment 

  - This example runs on STM32F1xx devices.
    
  - This example has been tested with STM3210E-EVAL RevD board and can be
    easily tailored to any other supported device and development board. 


@par How to use it ? 

In order to make the program work, you must do the following :
 - Open your preferred toolchain 
 - Rebuild all files and load your image into target memory
 - Run the example

 * <h3><center>&copy; COPYRIGHT STMicroelectronics</center></h3>
 */
