Back to Release page

Release Notes for STM32446E_EVAL Demonstrations

Copyright 2017 STMicroelectronics

 

Update History

V1.3.1 / 29-December-2017

Main Changes

  • Update stm32f4xx_hal_conf.h files to add support to HAL CAN Legacy Module.

V1.3.0 / 06-October-2017

Main Changes

  • Remove DATE and VERSION from the header of all the files.
  • Remove support of TrueSTUDIO toolchain
  • Fix compilation issues with Linux
  • Upgrade STemWin from 5.32 to 5.40
  • Update Demonstration to integrate PDM2PCM lib V3.0.0

V1.2.6 / 17-February-2017

Main Changes

  • General update to be aligned with new HAL SD and BSP Drivers implementation
  • Update to support latest version of FatFS middleware
  • Update to add the support of the external memories in system_stm32f4xx.c file
  • Update stm32f4xx_hal_conf.h file to remove unnecessary ETH PHY configuration

V1.2.5 / 03-June-2016

Main Changes

  • Update demonstration to support STemWin 5.32 version
  • Adjust Demo Touchscreen calibration

V1.2.4 / 06-May-2016

      Main Changes

  • Add new define USE_SPI_CRC in stm32f4xx_hal_conf.h file for code cleanup when the CRC calculation is disabled

V1.2.3 / 29-January-2016

      Main Changes
  • stm32f4xx_hal_conf.h:
    • Adjust the HSE Start-up Timeout value: 100ms instead of 5s
    • Add new define for the LSE start-up Timeout: LSE_STARTUP_TIMEOUT

V1.2.2 / 13-November-2015

Main Changes

  • Update to use slash "/" instead of backslash "\" in the include path to avoid the Unix compilation errors

V1.2.1 / 09-October-2015

Main Changes

  • Update SW4STM32 projects
    • Fix in accordance with latest version of SW4STM32 toolchain

V1.2.0 / 14-August-2015

Main Changes

  • Update to use latest version of FreeRTOS, FatFs, StemWin and USB Libraries

V1.1.0 / 01-July-2015

Main Changes

  • update system_stm32f4xx.c to properly configure external SDRAM
  • Icrease heap size to fix tree view population issue in file browser module
  • add the support of SW4STM32 toolchain

V1.0.0 / 13-March-2015

Main Changes

  • First official release

License

Redistribution and use in source and binary forms, with or without modification, are permitted, provided that the following conditions are met:
  1. Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of STMicroelectronics nor the names of other contributors to this software may be used to endorse or promote products derived from this software without specific written permission.
  4. This software, including modifications and/or derivative works of this software, must execute solely and exclusively on microcontroller or microprocessor devices manufactured by or for STMicroelectronics.
  5. Redistribution and use of this software other than as permitted under this license is void and will automatically terminate your rights under this license.

THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

For complete documentation on STM32 Microcontrollers visit www.st.com/STM32