This image was saved by Clonezilla at 2013-11-08 02:49:06 UTC.
The log during saving:
----------------------------------------------------------
Starting /usr/sbin/ocs-sr at 2013-11-08 02:47:15 UTC...
*****************************************************.
Clonezilla image dir: /home/partimag
Shutting down the Logical Volume Manager
Found udevd rule causes block devices with LVM signatures to be automatically added to their volume group.
Temporarily disable it otherwise the partition tool won't be able to inform the kernel the changes of partition table...
‘/lib/udev/rules.d/85-lvm2.rules’ -> ‘/lib/udev/rules.d/85-lvm2.rules.drblsave’
Finished Shutting down the Logical Volume Manager
The selected devices: sdg
PS. Next time you can run this command directly:
/usr/sbin/ocs-sr -q1 -c -j2 -z2 -i 200000000000000000 -sc -p true savedisk 2013-11-08-02-img sdg
*****************************************************.
The selected devices: sdg
Searching for data partition(s)...
Searching for swap partition(s)...
The data partition to be saved:   sdg1
The swap partition to be saved:  
The selected devices: sdg1
The following step is to save the hard disk/partition(s) on this machine as an image:
*****************************************************.
Machine: System Product Name
sdg (1706MB___ST31721A_Mass_Storage_Device_0-0:0)
sdg1 (30M_vfat_(null)(In__)_ST31721A_Mass_Storage_Device_0-0:0)
*****************************************************.
-> "/home/partimag/2013-11-08-02-img".
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Saving block devices info in /home/partimag/2013-11-08-02-img/blkdev.list...
Checking the integrity of partition table in the disk /dev/sdg... 
Reading the partition table for /dev/sdg...RETVAL=0
*****************************************************.
The first partition of disk /dev/sdg starts at 1.
Skip saving hidden data between MBR and 1st partition since it's not found.
*****************************************************.
Saving the MBR data for sdg...
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.000353138 s, 1.4 MB/s
Starting saving /dev/sdg1 as /home/partimag/2013-11-08-02-img/sdg1.XXX...
/dev/sdg1 filesystem: vfat.
*****************************************************.
This file system is not supported by smart programs, e.g. partclone, partimage or ntfsclone, or you force to use dd to save the file system: vfat
dd will save and restore all the blocks in the harddrive, no matter if the block is used or not.
Use this method to save the image instead of partclone, partimage or ntfsclone: partclone.dd + bzip2
Image file will be split with size limit 2000000000000 MB.
If this action fails or hangs after several minutes, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.dd -z 10485760 -N -L /var/log/partclone.log -s /dev/sdg1 --output - | bzip2 -c -3 | split -b 2000000000000m - /home/partimag/2013-11-08-02-img/sdg1.dd-img. 2> /tmp/split_error.JjQbQ9
Partclone v0.2.66 http://partclone.org
unknow mode
get device size 31457280 by ioctl BLKGETSIZE64,
we need memory: 12356 bytes
image head 4160, bitmap 7680, crc 516 bytes
Calculating bitmap... Please wait... done!
File system:  raw
Device size:   31.5 MB = 61440 Blocks
Space in use:  31.5 MB = 61440 Blocks
Free Space:     0 Byte = 0 Blocks
Block size:   512 Byte
Total block 61440
Syncing... OK!
>>> Time elapsed: 14.08 secs (~ .234 mins)
*****************************************************.
Finished saving /dev/sdg1 as /home/partimag/2013-11-08-02-img/sdg1.dd-img
*****************************************************.
End of saveparts job for image /home/partimag/2013-11-08-02-img.
*****************************************************.
End of savedisk job for image 2013-11-08-02-img.
Checking if udevd rules have to be restored...
‘/lib/udev/rules.d/85-lvm2.rules.drblsave’ -> ‘/lib/udev/rules.d/85-lvm2.rules’
Running 'udevadm control --reload-rules' to reload udevd rules...
This program is not started by Clonezilla server, so skip notifying it the job is done.
Finished!
Now syncing - flush filesystem buffers...

