Crowdfunding: assembly Cartridges Carnivore 2, display current status |
Здравствуйте, гость ( Вход | Регистрация )
Crowdfunding: assembly Cartridges Carnivore 2, display current status |
SuperMax |
12.5.2020, 13:42
Сообщение
#1
|
Администратор Группа: Root Admin Сообщений: 6 295 Регистрация: 7.1.2006 Из: Красноярск Пользователь №: 1 |
Sufficient number of orders collected
and ordering components for the assembly of cartridges Most components are currently in delivery. However they are already starting to arrive- currently delivered: 1. cartridge cases 2. M93C46 -------------------- Живы будем - Не помрем !
|
SuperMax |
17.7.2020, 19:48
Сообщение
#2
|
Администратор Группа: Root Admin Сообщений: 6 295 Регистрация: 7.1.2006 Из: Красноярск Пользователь №: 1 |
Photo of a printed circuit board assembly
i think it would be correct to make some clarifications 1.As you can see, the audio connector has been moved to the other side of the PCB to reduce the complexity of milling the cartridge case. 2. I'm sure you will notice that almost all tantalum capacitors have been replaced with ceramic capacitors. reasons for replacing two - in the sound circuit, correctly place non-polar capacitors . 4 pieces of tantalum 4.7μF 25V are replaced with ceramic non-polar SAMSUNG 4μF 50V. - in power circuits, ceramic capacitors are preferable, since they have a lower internal resistance. in fact, in ordinary life, tantalum capacitors or other oxide capacitors are blocked by ceramic to reduce resistance at high frequency. I have the opportunity to supply ceramic capacitors right away - I develop other boards and order ceramic capacitors in bulk and such a replacement is not expensive. All these replacements are made with only one goal - to achieve maximum product quality! -------------------- Живы будем - Не помрем !
|
Текстовая версия | Сейчас: 27.9.2024, 0:11 |