Sunrise IDE for MSX by MAXIOL Опции

[SuperMax]

We used the scheme © Pasha Zakharov 2: 5001/3 [thank him for the original decision] with minor changes.

Production and use of controllers Sunrise IDE BIOS agreed with the Jon De Schrijder & Sunrise.

Preview PCB


The finished printed circuit board


Assembled controller


Assembled controller with CF 2GB



Installed LEDs indicate:
Green - power supply controller
Yellow - active devices on the IDE port.
Blue - Activity CF-Card



firmware
Nextor 2.0.4
 Nextor_2.0.4.SunriseIDE.bin ( 128 килобайт ) Кол-во скачиваний: 8471


Sunrise 2.50
 SUNRISE_IDE_v2.50.bin ( 64 килобайт ) Кол-во скачиваний: 8317


especially the implementation of the controller:

not support for flashing the BIOS by MSX software.
It is possible to flash the ROM, or install the alternative firmware to the socket.


The controller is tested for the following MSX:
Yamaha MSX2 YIS503III R
Yamaha MSX2 YIS805/128 R
Panasonic FS-A1F (MSX 2)
Panasonic FS-A1FX (MSX 2+)
Panasonic FS-A1ST (Turbo-R)
Panasonic FS-A1GT
Philips VG 8235
Philips NMS8245

[SuperMax]

Creating a bootable CF-card at home
step by step guide

You have Linux
A. take the image and fill up using dd.
 msx_dos1.03.rar ( 14.32 мегабайт ) Кол-во скачиваний: 3862

 msx_dos2.2.rar ( 14.32 мегабайт ) Кол-во скачиваний: 3877

 msx_dos2.44.rar ( 14.39 мегабайт ) Кол-во скачиваний: 3892



B. You do not have Linux on the desktop (for example I have my Linux servers and desktops on Windows only)
You need:
- USB flash
- USB card reader for CF or another option to connect CF-Card



1. formatted USB flash FAT16 or FAT32

2. deploy archive Attachment clonezilla_live_msx_dos2.44.zip (173.02 megabyte) Number of downloads: 20
on USB flash
then at the very start the flash drive utils win32 makeboot.bat
Hit enter 2 times

3. To turn off the PC, connect the USB flash and CF-card



4. turn on when you start entering the boot menu

choose to boot from USB flash

After a successful download see:

choose the credit default menu, click enter


5. From the menu, select the drive where chooses to deploy CF-card
make no mistake!



and press enter, then repeatedly confirm

6. Successful completion of the fill image